Description
Mark Williams Cue Finishing Oil is a premium finishing oil designed to enhance and protect your cue while preserving the natural character of the wood. It builds to a fine finish with minimal fuss and delivers either a natural satin look or a gloss finish depending on the number of coats applied.
This oil is moisture resistant and will not change the colour of your cue or crack with age, making it ideal for long-term cue maintenance and restoration. It enhances the natural grain and depth of ash or maple without creating a heavy surface build-up.
The 30ml bottle provides more than enough product to fully finish a cue. For best results, apply 3 to 4 coats, allowing 2 to 4 hours curing time between coats.
Apply the first coat to finely sanded wood (600–800 grit) or after a sealer coat. The oil can be applied using a soft cloth or rubbed in using 1200 grit wet and dry paper. Leave for 5 to 10 minutes, or until slightly tacky, then wipe off any excess with a clean cloth. Allow the cue to cure completely before applying the next coat.